IND. DFM 4GB WIDE TEMP. USB INTERNAL VERTICAL

Compatibility     True IDE

Flash Technology NAND Type SLC Flash Memory based

Flash Capacity 128MB, 256MB, 512MB, 1GB, 2GB, 4GB, 8GB and 16GB

Form factor                            40-pin / 44-pin Vertical Type with housing

                                                     Horizontal Type in Rightwards

                                                         Horizontal Type in Leftwards

Connector                                Standard 40-pin 2.45mm female IDE connector

                                                 Standard 44-pin 2.20mm female IDE connector

System Performance

Data Transfer Mode          PIO Mode 4 / UDMA Mode 4

Sequential Read        Standard     30Mbytes / sec Max.

                                     High            43Mbytes / sec Max.

Sequential Write

Standard         20Mbytes / sec Max.

High               37Mbytes / sec Max.

Average Access Time     2ms

Environmental Specification

Standard Temperature          Operating        0℃~70℃

                                          Non-operating       -20℃~80℃

Wide Temperature

                                         Operating                           -40℃~85℃

                                      Non-operating                  -50℃~95℃

Humidity                   5~95% non-condensing

Vibration                 20 G peak to peak

Shock                   1500 G

Reliability

MTBF (Mean Time Between Failure)     > 2,000,000 hours

Error Code Correction    4 bits ECC Code Endurance Greater than 1,000,000 cycles logically contributed by wear-leveling and advanced bad sector management algorithms.

Power Consumption

Power Requirements     +5V ± 10% ; +3.3V ± 5%

Read 57.7 mA (typ.)

Write 60 mA (typ.)

Sleep Mode 2.3 mA (typ.)