INDUSTRIAL SSD 128GB 2.5" IDE SLC FLASH STANDARD TEMP
In stock
SKU
INDUSTRIAL SSD 128GB 2.5" IDE SLC FLASH STANDARD TEMP
$1,078.75
Fully compatible with devices and operating systems that support the E-IDE / ATAPI-4 standard. Supports Ultra DMA Mode 4. High reliability based on internal ECC function. Reliable wear-leveling algorithm for maximum flash endurance. Suitable for rugged environments.
Fully compatible with devices and operating systems that support the E-IDE / ATAPI-4 standard. Supports Ultra DMA Mode 4. High reliability based on internal ECC function. Reliable wear-leveling algorithm for maximum flash endurance. Suitable for rugged environments.
Specifications:-
- Compatibility ATAPI-5 Standard Flash Technology
- NAND Type Flash Memory Base
- Flash Capacity 128MB, 256MB, 512MB, 1GB, 2GB, 4GB, 8GB, 16GB, 32GB, 64GB, 128GB and 256GB
- Form factor 2.5inch or 1.8inch
- Connector Standard 44pin male
- IDE connector Master/Slave Setup By Jumper
- System Performance Data Transfer Mode PIO Mode 4 / UDMA Mode 4
- Sequential Read Standard 29Mbytes / sec Max.
- High 43Mbytes / sec Max.
- Sequential Write Standard 19Mbytes / sec Max. High 37Mbytes / sec Max. Average Access Time 1ms
Environmental Specification
- Standard Temperature Operating 0℃~70℃
- Non-operating -20℃~80℃
- Wide Temperature Operating -40℃~85℃
- Non-operating -50℃~95℃
- Humidity 5~95% non-condensing
- Vibration 20G peak to peak
- Shock 1500 G
- Reliability MTBF (Mean Time Between Failure) > 2,000,000 hours
- Error Code Correction 4 bits
- ECC Code Endurance Greater than 1,000,000 cycles logically contributed by wear-leveling and advanced bad sector management algorithms.
- Power Consumption Power Requirements +5V ± 10%
- Read 85 mA (typ.)
- Write 90 mA (typ.)
- Standby Mode 2 mA (typ.)